In a recent game we had the instance of a German Smoke Barrage running in to a British double phase just as the barrage was coming to an end. This led to some questions and rulebook consultation and in the end I think we got it right, however I thought others might appreciate our thoughts and experience.
So here is the step-by-step process for resolving an off-table Medium Mortar Bombardment executed by German forces against British troops across varying levels of cover, including double phase mechanics and lingering smoke rules under Chain of Command².
![]() | |
4.2-inch mortar of 'S' Troop, 307th Battery, 99th Light Anti-Aircraft Regiment in action at Cassino, 12 May 1944.
|
For the purposes of this example the British have troops in the Open, along a hedge, in an Entrenchment, and on the ground floor and top floor of a two storey building and finally in a single storey building.
We will assume a standard 3 phase bombardment that starts when initiated for simplicity.
German Phase 1: Calling in the Barrage and 1st Salvo Effects
The Germans activate their FOO, place their Aiming Point and call in the ranging shot. We will assume that the shot is on target and a standard (non-devastating) bombardment begins immediately.
In standard late war CoC² an 18"x18" square is placed around the Aiming Point (early war is different, see my take on bringing the 1940 Blitzkrieg Book in to CoC² alignment) and the mortar shells beginning to rain down.
The bombardment area of effect is immediately filled with smoke and fire which blocks LoS completely which means Units can't fire into, out of or through the bombardment area.
The German player then determines secretly if the barrage is Static or Rolling, for our example it will be Static.
As this is the first phase of bombardment it catches the British unawares, and 4 Firepower Dice per Team is dished out with the following effects:
- Units in the Open get treated as in the Open and then become Pinned increasing their cover by one level (up to Light Cover).
- Units along a Hedge or similar linear obstacle, get treated as in the Open and then become Pinned increasing their cover by one level (up to Light Cover).
- Units in an Entrenchment get treated as in Hard Cover and then become Pinned increasing their cover by one level (remains Hard Cover).
- Units in a single storey building get the appropriate cover level from the building and then become Pinned after the first salvo because the building lacks overhead multi-floor protection. Units in wooden buildings would now be in Hard Cover, those in brick would remain Hard Cover.
- Units in a multiple storey building get the appropriate cover level from the building but this is where they then differ from the single storey building application.
- Rules as written treat all the Units the same as they have to the overhead multi-floor protection which results in all Units not becoming Pinned during the bombardment.
I think this is odd, Units on the ground floor or those with at least one floor above them should be immune to being Pinned but the Units on the top floor are essentially the same as a Unit in a single storey building and would become Pinned. At least, this makes sense in my mind anyway!
Bunkers, Fortifications and Keeps would also be immune to Pinned effects from a bombardment.
British Phase 1
British player can remove shock and do other stuff as they see fit.
German Phase 2: Continuing the Barrage and Salvo Effects
Assuming the Germans can continue the bombardment, in the 2nd German phase the bombardment effects are applied but some of the targeted Units would be Pinned and have the better cover protection.
British Phase 2
British player can remove shock and do other stuff as they see fit.
German Phase 3: Final Phase of the Barrage and Salvo Effects
Assuming the Germans can continue the bombardment, in the 3rd and final German phase the bombardment effects are applied again but some of the targeted Units would be Pinned and have the better cover protection.
In this example the 3rd phase is the final phase although they could have bought Support Choices to extend it. The active bombardment finishes in this phase but the post-barrage effects continue until the end of the following phase.
British Phase 3: "The Following Phase"
With the bombardment finished there are the lingering effects for one phase. These effects end at the end of this phase. Smoke and Pinning effects remain within the bombardment area of effect at the start of the phase. At the end of the phase smoke and Pinning effects/markers are removed.
German Phase 4
The German player can now play their phase as usual, and usually they would have moved up closer to the area of bombardment and can now reap the benefits of all of their hard work.
| Phase | Effects |
|---|---|
| German Phase 1 | Call in the barrage and resolve the first salvo. |
| British Phase 1 | |
| German Phase 2 | Second salvo. |
| British Phase 2 | |
| German Phase 3 | Final salvo. |
| British Phase 3 | The Following Phase. Smoke and Pinning from the barrage still apply. At the end of this phase, remove the smoke and Pinning effects or markers caused by the barrage. |
| German Phase 4 | Play resumes post barrage. |
Now this is all lovely (well, not if you are the one getting shelled) but what happens if a double phase is rolled by either player during the period of bombardment or "following phase"?
What If: German Double Phase Mid-Barrage?
If the German player rolls a double phase , the German player must immediately execute another salvo, using another phase of the 3 in total. The British player gets gets no phase in between to rally Shock, use Leaders, or attempt Repositioning 8. They suffer back-to-back mortar salvos in rapid succession.
What If: British Double Phase Mid-Barrage?
If the British player rolls a double phase (two or more 6s on their Command Dice) mid-barrage, while the German mortar bombardment is still active with rounds remaining, it creates a unique tactical pause.
No new mortar shells land during the British phases, but the barrage's physical presence remains on the table. Because both consecutive phases belong to the British, the German FOO cannot activate the next salvo, and the ammo tracker does not tick down, smoke remains on the board, continuing to completely block Line of Sight into, out of, and through the area. British units trapped inside the zone remain Pinned for both phases, as the bombardment has not ended.
Because the British get two back-to-back active phases without taking additional mortar hits, they can exploit this window to spend two phases removing shock and other orders.
What If: German Double Phase at the End of Barrage?
If the German player rolls a double phase on the last round of barrage in Phase 3 what happens then? Well, in the current phase 3 the bombardment continues and then in the subsequent German double phase 4 this phase becomes "The Following Phase" during which smoke and pinning remain until the end of that phase at which point the British player starts their phase unsmoked and unpinned.
What happens if a Double Phase occurs on the LAST Phase of the Barrage?
(Example: German Phase 3 fires the final salvo, and the German player rolls a Double Phase into German Phase 4)
Phase 3 (Salvo 3): Final 4D6 hits/team are rolled. Ammo reaches 0. The barrage officially ends, triggering the "Lingering Effect" clock 4, 19.
What If: British Double Phase at the End of Barrage?
If the British player rolls a double phase immediately after the final salvo of the mortar bombardment, it works out heavily to the British player's tactical advantage.
Here is the exact phase-by-phase breakdown of how the lingering rules and the double phase resolve:
German Phase 3 (The Final Salvo)
The final salvo of mortar fire lands, resolving hits on units in the area. Ammunition reaches zero and the bombardment officially ends.British Phase 3 (First Phase of the British Double Phase - "The Following Phase")
Because British Phase 3 is the immediate following phase after the barrage ends, smoke and pinning effects are still in existence. At the end of this phase all those effects are removed.
British Phase 4 (Second Phase of the British Double Phase - "The Reversal")
Because the British rolled a double phase, play immediately moves into British Phase 4 before the German player gets a phase. There are no longer any bombardment restrictions and if the Germans had crept up to the British positions earlier they may well find themselves dangerously exposed.
Funnily enough this is what happened in our game, a smoke barrage was called in, the Germans closed but the British rolled a double phase right at the end and opened up on the very exposed Bosch!
.jpg)
No comments:
Post a Comment